Professional Adhesive Remover

Ultraguard ResidueX Adhesive
Remover for Fast Removal & PPF Cleanup

ResidueX is a fast-acting adhesive remover made for pro installers. Quick breakdown, smooth removal, up to 90% less removal time. Safe on PPF, vinyl and painted surfaces, and leaves every panel clean and residue-free.

Fast-acting formula

Removes glue residue

Non-toxic formulation

Multi-surface compatibility

Enquire Now View Specifications

Up to 90%

Less Removal Time

5-10 min

Reaction Time

Safe Surfaces

Non-Toxic

Formulation

Removal Without Struggle

ResidueX Adhesive Remover for Clean and Residue-Free Surfaces

Ultraguard ResidueX turns stubborn glue into a quick wipe. This fast-acting adhesive remover breaks down tacky residue, dried glue and film adhesives so you don't have to fight them. Spray, wait 5-10 minutes, then clear it away. Up to 90% less removal time on PPF and vinyl, and a clean, residue-free panel at the end. Built for installers who are done with scraping.

Fast-Acting Residue softens in 5-10 minutes.

Removes Glue Residue Tacky residue, glue and adhesive. Gone.

Smooth Removal Loosened residue lifts off with a cloth.

Non-Toxic Formulation Made with non-toxic solvents.

Built to Break Down Stubborn Residue

Dissolves tacky residue, dried glue and film adhesives

Made for PPF and vinyl wrap adhesive removal

Up to 90% less removal time. Fast-acting formula.

Formulated with non-toxic and non-dangerous solvents

Spray, wait, wipe. Done.

Installer's Edge

How to Apply ResidueX

Shake the bottle well. Hold Ultraguard ResidueX about 20 cm away and spray it onto the affected area.

Let it work for 5-10 minutes. The adhesive or residue softens, ready to lift.

Gently scrape the loosened residue away using a squeegee or microfiber cloth. Wipe clean.

Finish by washing the surface with car shampoo to remove any leftover product.

Best For

Where ResidueX Excels

Adhesive Removal

Glue Residue Cleaning

PPF Removal Cleanup

Surface Prep Before Re-installation

AVAILABLE IN

473 ml Bottle

4 Ltr Can

Precautions

Protect headlights, taillights, turn signals and vehicle A & B pillars before use. Failure to protect these areas may result in irreversible damage.
For repainted or non-original paint surfaces, test on a small hidden area before full application.
In case of eye contact, rinse immediately with plenty of water and seek medical attention.
If swallowed accidentally, seek immediate medical assistance.
Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

FAQs

ResidueX Questions, Answered

Still have questions? Message us on WhatsApp for a direct answer.

No. If you use it as directed, it will not harm the surfaces. ResidueX is designed to be safe on PPF, vinyl wraps and all painted panels. On repainted or non-original paint, test a small hidden area first. Then wash the surface with car shampoo to clear leftover product. Proceed only if it's safe.

ResidueX needs 5-10 minutes to remove glue. Spray, wait, wipe. It softens glue, dried adhesive or tacky residue. Then a squeegee or microfiber cloth lifts it gently. Fast-acting formula saves up to 90% of removal time. Your panels get back to work sooner.

The size depends on your volume. A busy studio running daily PPF removals needs larger packs. A smaller shop can start with a single bottle. Available sizes: 473 ML bottle and 4ltr can. You can contact Ultraguard for recommendations.

You should protect headlights, taillights, turn signals and the A and B pillars before you spray. Skipping this step can cause irreversible damage. Cover them first, then spray from about 20 cm. If the vehicle has repainted panels, test a small hidden area before application.

Ultraguard products are sold through authorised dealers, and ResidueX is built for professional installers and detailing studios. Contact your nearest authorised dealer for current stock and pricing. Need bulk supply? Reach out to Ultraguard India directly about studio orders today.

Ultraguard ResidueX Adhesive Remover for Fast Removal & PPF Cleanup